Hospital Oxygen Respirator ICU Ventilator Machine Price

900B-II Chinese Professional Medical icu ventilator machine
The DP-900BII icu ventilator machine is an electrically controlled pneumatic ventilator integrating such functionsas time, volume cycling, pressure limit, etc. , it provides an alternation in case of irreversible lesions in respiratorymuscles or irreversible damage to upper airway to maintain the respiratory function of the patient, and alsoprovides ventilation assistance for the patient during the recovery from a disease or operation.
TECHNIQUES SPECIFICATIONS
Physical specifications
Display
10.4'' LCD Display
Mode:
pneumatically powered and electrically controlled system
Trolley:
Fitted with 4 nos anti-static rubber castors; two of which are lockable for braking and easy maneuverability with foot operated brake provisionsTechnical Specifications:
Gas requirement:
Medical oxygen and nitrous oxide with a pressure ranging from 280~600kpa
safety valve
<12.5 kPa
Respiratory Rate
1 ~ 99 bpm
gas concentration output
21% ~ 100% adjustable
Maximum Minute ventilation
≥18L / min
modes of ventilation
A/C, SIPPV,IPPV,SIMV,PSIMV,CPAP,PCV,PEEP,SIGN,SPONT, MANUAL
Ventilator compliance
≤30 Ml/kPa
PEEP:
0 ~ 1.0 kPa
Ptr:
-10 ~ 10 hPa
IMV frequency:
1~20 bpm
I/E Ratio:
4:1~1:4, Has the inverse ratio ventilation
Tidal Volume
Setting Range: 50~1500ML Display Range: 0~2000ml ; resolution ratio: 10mlInspiratory Plateau:
0~1s
Maximum Safety Pressure
≤ 6.0kPa
Sigh:
one deep breath per 80 controlled respirations, the inspiration time is 1.5 times of the setting point
Pressure limit range:
1.0~ 6.0kPa
Airway pressure alarm: Audible and visual and with yellow and red color indicating
Lower: 0.1 kPa ~ 6.0 kPa; Upper: 0 ~ 5.0 kPa
±0.2 kPa
Ventilation Volume alarm:
≥ 18L/ MIN
Power Supply Alarm
"Ac/dc power supply are after failing to send out alarm immediatelyAlarm Time: keep >120s"
The airway pressure continues to be higher than 15 hPa±1 hPa for 15s±1s, then the machine will raise an audible alarm, the pressure will be displayed in red and thecontinuous high pressure red alarm wording is displayed on the screen of the anesthetic respirator.
Operating conditions
Ambient temperature:
10 ~ 40oC
Relative humidity:
no higher than 80 %
Atmospheric pressure:
860 hPa ~ 1060 hPa
Power requirement:
100-120 Vac, 50/60 Hz;
Attention: the AC power supply used for the anesthesia machine must be well grounded.
Attention: the anesthesia machine used must be equipped with a carbon dioxide monitor complying with ISO 9918:1993, an oxygen monitor complying with ISO7767:1997 and an expiratory gas volume monitor complying with 51.101.4.2 of Medical Electrical Equipment Part II: Special Requirements for Safety and BasicPerformance of Anesthesia System.
Storage
Ambient temperature:-15oC~ +50oC
Relative humidity:
no higher than 95 %
Atmospheric pressure:
86 kPa ~ 106 kPa.
It should be stored in a room without corrosive gas and well ventilated